Upgrade Aruba IAP325 controller firmware from 6.5.4.3 to 8.7.1.3 with cluster mode

-

 

1) Upgrade Aruba AP Firmware from 6.5.4.3 to 8.7.1.3 with cluster mode


Download the firmware from Aruba Support Portal

https://asp.arubanetworks.com

Login with username and password


Find the correct the AP models and Serial Number

  •   Check the warranty status in HPE page
  •    Login to the support portal to download the firmware
  •    Software and Documents>Aruba Access Points>Product Series(IAP325)>Major Version 8.7>Minor Version 8.7.1.3. Download Ursa_8.7.1.3


  • Set up TFTP server from your laptop to AP Controller. Make sure both can able to ping each other.
  • Put the downloaded files into the TFTP servers.
  • Under Maintenance>Firmware(Eg for Hercules IAM325 and IAM305)

 tftp://192.168.1.222/ArubaInstant_Hercules_8.7.1.3_79817

 

tftp://192.168.1.222/ArubaInstant_Ursa_8.7.1.3_79817

  • Enable reboot all the APs after upgrade
  • Click Upgrade now.



2) To change back from standalone to cluster or cluster to standalone, kindly refer to the steps.

 For IAP1:

 

1.       Putty to IAP1 IP Address: 192.168.1.10

 

2.       Type “show swarm mode” to see the cluster or standalone mode

 

3.       Type “swarm-mode cluster” to change from standalone to cluster or

 

Type “swarm-mode standalone” to change from cluster to standalone

 

4.       reload. 

    5.    After reload, IAP1 is removed from the cluster list and it will be standalone mode.


 

 


Comments

Post a Comment

Popular posts from this blog

FortiGate-100D: EXT2-fs(sdb1):previous I/O error to superblock detection

-
When you are facing the issues that the kernel errors something like firewall is rebooting auto or outage of power supply accidently. So all the LAN interfaces shut down in the firewall. Problem: The errors will be like this: EXT2-fs(sdb1):previous I/O error to superblock detected. EXT2-fs(sdb1):previous I/O error to superblock detected. EXT2-fs(sdb1):previous I/O error to superblock detected. Troubleshooting Commands: 1) Try to get the debug logs https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-download-debug-log-file-at-different/ta-p/193211 2) Get the result details #get hardware status #get system status #get system performance status # diagnose sys flash list # diagnose autoupdate status # diagnose autoupdate versions # diag debug crashlog read # diagnose hardware sysinfo memory # diagnose hardware sysinfo shm # diagnose hardware sysinfo slab # diagnose debug crashlog read # diagnose hardware deviceinfo disk # diagnose sys session stat Resolution: The issue is res...
Read more

SFTP (CrushFTP serevr) renew Certificate

-
Image
  SFTP (CrushFTP serevr) renew Certificate 1.        Use a certificate issued legitimately from CA (Sectigo) 2.        Generate PFX file via IIS  Manager Ensure the file type is *.pfx Password: star_photostriker 3.        Copy file over to SFTP server 4.        Convert PFX file to jks 5.     keytool -importkeystore -srckeystore mypfxfile.pfx -srcstoretype pkcs12 -destkeystore identity.jks -deststoretype JKS    6.   Login into CrushFTP web console 7.      Go to navigate to Preferences, Encryption and open the SSL tab. Click on the Import Reply button   8.        Input Keystore Path and Keystore Password   9.        Click on the Browse button next to the Import Certificate Authority Reply File and upload the certific...
Read more

Check the cisco device MAC address and IP address

-
 To check the cisco device MAC address and IP address C2960#sh mac address-table interface gi1/0/3  and C2960#sh mac address-table address 2894.0f64.0340  Mac Address Table ------------------------------------------- Vlan    Mac Address       Type        Ports ----    -----------       --------    -----  413    2894.0f64.0340    DYNAMIC     Gi1/0/3 ========================================================= C2960#sh ip arp 2894.0f64.0340 Protocol  Address          Age (min)  Hardware Addr   Type   Interface Internet  191.65.230.30          154   2894.0f64.0340  ARPA   Vlan413
Read more